dwg AVX-0250 · rev. B
Filter elements
Pleats that perform.
Custom metal filter elements — pleated, cylindrical, conical or basket — built from our own media and made to fit your housing, not the other way around.
A filter element is where media engineering meets fabrication. Averinox builds elements from its own woven, sintered and knitted media: pleated cartridges for maximum area, candles for high pressure, baskets and cones for catalyst and coarse duty, V-wire elements where slot geometry and strength rule.
Pleated elements use sintered metal-fibre fleece or sintered woven laminate as the working layer: high porosity, large surface, serious dirt-holding capacity. They carry high-molecular polymer melts, hydraulic oil, waste water and hot gases — and unlike disposable cartridges they are cleaned and returned to service.
Elements are made to drawing or as direct interchange for existing installations. Worn or damaged elements can be refurbished; housings can be engineered and supplied with the elements as a complete scope.
Applications
- Polymer melt and spinneret protection filtration
- Hydraulic and lube oil systems
- Hot gas filtration and catalyst recovery
- Strainers and protective filters in water treatment
- Catalyst baskets and cone strainers in (petro)chemical plants
Features & benefits
- All-metal construction: cleanable, weldable, traceable
- Pleated designs with up to several times the flat-media area
- Direct interchange for common OEM elements
- Refurbishment programme for worn elements
- Complete scope including housings and spare-part packages
Specifications
| Property | Value |
|---|---|
| Element types | Pleated cartridges, cylindrical candles, baskets, cones, discs, V-wire (wedge wire) elements |
| Filter media | Woven mesh, sintered mesh laminate, sintered metal-fibre fleece, knitted mesh, perforated plate |
| Rating | 0.5 µm – 2 mm; sintered candles from 2 µm standard |
| Connections | To drawing or to OEM interchange (common industry end-caps and adapters) |
| Pressure / temperature | High-ΔP designs; hot-gas service with appropriate alloys |
| Housings | Design and supply of filter housings on project basis |
Materials & variants
316L is standard; 904L, Inconel™, Hastelloy™ and Duplex™ cover aggressive media and high temperatures. End caps, cores and hardware are matched to the medium, with full material certification under ISO 9001.
Frequently asked questions
Can you replace elements from another manufacturer?
Usually, yes. Send the element (or its drawing and key dimensions) and we produce an interchange — often with an upgraded medium that lasts longer in your specific process.
When is a pleated element worth it over a plain candle?
When flow or dirt load drives the sizing. Pleating multiplies the filtration area in the same envelope, cutting ΔP and stretching cleaning intervals; for low loads a plain candle stays the simpler choice.
RFQ
Send us the drawing — or let us draw it.
Share your specs, a sketch or a worn-out sample. Our engineers reply within one business day with a practical proposal.